On-site inspections / R&D · Interface and positioning validation

Wind Turbine Tower Inspection and Robotic Maintenance

After a drone captures corrosion on a steel tower, the ground station records and verifies the location before handing it off to a magnetic climbing robot. Equipment interfaces and positioning are being validated.

Illustration of corrosion detection, a magnetic climbing robot and a ground station
Illustration of corrosion detection, a magnetic climbing robot and a ground station

From an image to a location on the tower

The project links tasks, drone images, defects, mapped positions and maintenance records for offshore steel turbine towers.

Imaging, positioning, maintenance and review

  • Save original images, tie them to inspection tasks and route detected defects to human review.
  • Map defects by height and position around the tower, then verify the transform and calibration on physical equipment.
  • Connect task records and interfaces for positioning checks, coating thickness measurements, grinding and spraying.
  • Link before-and-after images and measurements to the work record for quality review.

The role of the ground station

The software covers image processing, defect tracking, work records and device interfaces. Testing determines which feedback can reliably show what the equipment actually did.

Current validation

We are validating interfaces and positioning. Image recognition, mapping, positioning checks and work logs require phased integration. Autonomous positioning and on-site maintenance depend on real equipment tests.

The illustration shows the proposed relationship between software and equipment.